Difference between revisions of "Blending"

From Milk The Funk Wiki
Jump to: navigation, search
Line 1: Line 1:
==Introduction==
+
Introduction
Blending is the process of pulling samples of various, matured sour beers (and optionally clean beers), measuring out different proportions of each, mixing them together, and tasting the blended samples.  The idea is that different sour beers can contribute different flavors, and balance different flavors.  Since precise measurements are required, investing in [https://www.google.com/search?q=farheniet+to+celcius&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=sb#safe=off&rls=org.mozilla:en-US:official&channel=sb&tbm=shop&q=plastic+beakers cheap plastic beakers] is necessary.  The taste tester should take thorough notes on all aspects of the beer as different proportions of blends are sampled.   
+
'''Blending''' is the process of pulling samples of various, matured sour beers (and optionally clean beers), measuring out different proportions of each, mixing them together, and tasting the blended samples.  The idea is that different sour beers can contribute different flavors, and balance different flavors.  Since precise measurements are required, investing in [https://www.google.com/search?q=farheniet+to+celcius&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=sb#safe=off&rls=org.mozilla:en-US:official&channel=sb&tbm=shop&q=plastic+beakers cheap plastic beakers] is necessary.  The taste tester should take thorough notes on all aspects of the beer as different proportions of blends are sampled.   
  
 
==Practical Tips==
 
==Practical Tips==

Revision as of 10:32, 17 March 2015

Introduction Blending is the process of pulling samples of various, matured sour beers (and optionally clean beers), measuring out different proportions of each, mixing them together, and tasting the blended samples. The idea is that different sour beers can contribute different flavors, and balance different flavors. Since precise measurements are required, investing in cheap plastic beakers is necessary. The taste tester should take thorough notes on all aspects of the beer as different proportions of blends are sampled.

Practical Tips

  1. Chill the samples. Taste them cold, and allow them to warm up to room temperature, tasting and smelling along the way.
  2. Taste each beer on it's own. Choose the best beers to begin with. Off flavors can sometimes be blended out (see Matt Miller's article below), but consider leaving beers with serious flaws out of the blend.
  3. Take note of everything you taste and smell, also noting the general temperature of the blend.
  4. Taste with friends who have good palates.
  5. A blend may not always taste the same once conditioned and carbonated.
  6. When blending a clean beer with sour beers, allow for additional fermentation to occur. Don't make any assumptions about a low final gravity of a clean beer - the Brett will probably find something to ferment.
  7. Make use of Michael Tonsmeire's Blending Priming Calculator if possible.

Articles On Blending


References