Difference between revisions of "Eccentric Beekeeper Bulldog"
| Line 3: | Line 3: | ||
==Overview== | ==Overview== | ||
[[File:EBK Bulldog Overview.jpg|none|200px|thumb|400px|Overview of the Essentric Beekeeper Bulldog]] | [[File:EBK Bulldog Overview.jpg|none|200px|thumb|400px|Overview of the Essentric Beekeeper Bulldog]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | |||
| + | <gallery widths="180px" heights="120px"> | ||
| + | File:EBK Bulldog Overview.jpg|thumb|Overview of the Essentric Beekeeper Bulldog | ||
| + | File:EBK Bulldog Closeup.jpg|The bore-through compression fitting allows the racking wand to pass completely through the fitting making the depth adjustable to prevent sediment transfer. | ||
| + | File:EBK Bulldog Pressure Release.jpg|Adjustable emergency pressure release. | ||
| + | File:EBK Bulldog Triclover.jpg|Triclover attachment to rubber bung adapter. | ||
| + | File:EBK Bulldog Triclover Bung.jpg|The triclover rubber bung adapter lets me use the same Bulldog racking wand for Sanke fermenter kegs with barrels. | ||
| + | File:EBK Bulldog Underside.jpg|An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wand. The standard stainless steel compression rings/sleeves in the bore-through compression fitting have been replaced with silicone o-rings which seal with minimal tightening on the nut and never attach to the tubing permanently. These replacement o-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal. | ||
| + | </gallery> | ||
==Parts List== | ==Parts List== | ||
[[File:EBK Bulldog Parts.jpg|right|600px]] | [[File:EBK Bulldog Parts.jpg|right|600px]] | ||
Revision as of 14:32, 24 December 2015
The Essentric Beekeeper Bulldog is a homemade bulldog for racking beer out of barrels using CO2 pressure. See this page for other barrel racking canes.
Contents
Overview
Overview of the Essentric Beekeeper Bulldog
The bore-through compression fitting allows the racking wand to pass completely through the fitting making the depth adjustable to prevent sediment transfer.
Adjustable emergency pressure release.
Triclover attachment to rubber bung adapter.
The triclover rubber bung adapter lets me use the same Bulldog racking wand for Sanke fermenter kegs with barrels.
An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wand. The standard stainless steel compression rings/sleeves in the bore-through compression fitting have been replaced with silicone o-rings which seal with minimal tightening on the nut and never attach to the tubing permanently. These replacement o-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal.
Parts List
- Cornelius-Type Gas Side Plug, P53 - This no longer includes the needed Universal Poppets (our item L92) or Ball Lock O Rings (item D12). You will need one L92 and one D12 in addition to this post to complete your male in gas fitting.