Changes

Jump to: navigation, search

Aging and Storage

45 bytes added, 20:23, 30 April 2017
m
no edit summary
One study showed that adding gallic acid (tannic acid from Chinese or Aleppo gallnuts) during the mash and sparge water extended the shelf life of beer by reducing off-flavors such as trans-2-nonanol, the aldehyde responsible for the papery taste in stale beer. It also bound to proteins containing thiols that when oxidized during mashing can cause filtering and amylolytic issues, and settled them out during the mashing/boiling which made filtration easier. The study determined that the tannic acid did not have an impact on the saccharification rest or the soluble protein content (including head retention proteins). It did have a very slightly negative impact on yeast attenuation, however the addition of zinc resolved the attenuation issue (it is thought that the gallic acid dropped the zinc out of solution since it binds with metals, and thus negatively impacted the yeast's health) <ref name="Aerts_2004">[http://www.mbaa.com/publications/tq/tqPastIssues/2004/Abstracts/0831-01.htm Evaluation of the Addition of Gallotannins to the Brewing Liquor for the Improvement of the Flavor Stability of Beer. Guido Aerts, Luc De Cooman, Gert De Rouck, Zoltan Pénzes, Annemie De Buck, Roger Mussche, and Joseph van Waesberghe. 2004.]</ref>.
The sensory analysis in this study showed that all of the fresh beers with or without gallic acid scored positively by tasters, although they preferred the beers with gallic acid because of their "fullness of taste and mouthfeel". After 5 days of storage at 40°C, the beers with gallic acid continued to rate high while the non-gallic acid beers began to show signs of staling (darker in color, cardboard flavor, slight sweetness, and a sharp unpleasant bitterness). After storing the beers for 10 days at 40°C the non-gallic beers were clearly more oxidized. These results were confirmed by also storing the beers for one year at 4°C in the dark; the beers with gallic acid were always preferred by tasters. The beers with gallic acid added during the mashing and sparging had better flavor stability, and better stability of hop compounds such as iso-alpha acids. They also had a higher polyphenol content from the malts (only hop extract was used, so the polyphenol content had to come from the malts). The [https://en.wikipedia.org/wiki/Lipoxygenase lipoxygenase activity ('''LOX''')], which is the mechanism by which lipids are oxidized to create off-flavors, was also decreased in the beers with gallic acid added. They also found that the "Strecker" and "Maillard" derived aldehydes phenylacetaldehyde, furfural, benzaldehyde were reduced by the use of gallic acid (fatty-acid derived aldehydes were not reduced, but there is evidence that these are already present in malt and are not formed during the mashing process, unlike the previously mentioned aldehydes). Trans-2-nonenal (papery, cardboard staling flavors) was also reduced in beers brewed with gallic acid. The study found that mashing with gallic acid at 62°C and 5.3 pH had the most positive impacts on both flavor stability and the prevention on off-flavor development <ref name="Aerts_2004" />.
Tannic acid products are now being sold in the brewing industry, such as ''Brewtan B'' which contains gallic acid extracted from oak galls without the impurities that can often be found in other commercial tannic acid products. This manufacturer claims that the product enhances initial clarity of wort and colloidal stability of beer over time, stabilizes hop bitterness, reduces aldehyde formation, and increases flavor and color stability over time. The dosage for this product is quite low at 1.5–4.0 g/hL <ref name="Formanek _2017" />. Author [https://www.experimentalbrew.com/podcast/episode-25-brewtan-your-questions-away Denny Conn of Experimental Brewing] has noted that the use of Brewtan B increases the mouthfeel and flavor stability of beer <ref>[https://www.experimentalbrew.com/podcast/episode-25-brewtan-your-questions-away "Episode 25 - BrewTan Your Questions Away". Experimental Brewing podcast (~25 minutes in). Retrieved 04/17/2017.]</ref>. Brewtan B specs and usage can be found [http://www.natural-specialities.com/PDF/Data-sheets/Brewtan%20B%20%20-%20Datasheet%20v1.0.pdf here].

Navigation menu