Difference between revisions of "Sake"
Line 63: | Line 63: | ||
===Makgeolli=== | ===Makgeolli=== | ||
* [https://www.facebook.com/groups/MilkTheFunk/permalink/2882935991734596/ MTF post by Denise Rheault on brewing Makgeolli.] | * [https://www.facebook.com/groups/MilkTheFunk/permalink/2882935991734596/ MTF post by Denise Rheault on brewing Makgeolli.] | ||
+ | * [https://www.facebook.com/groups/MilkTheFunk/permalink/3277030195658505/ MTF post by Denise Rheault on the temperature and humidity for incubating Nuruk.] | ||
==Alternate Molds== | ==Alternate Molds== |
Revision as of 16:14, 14 February 2020
Sake, also spelled saké (/ˈsɑːkeɪ/ SAH-kay US also /ˈsɑːki/ SAH-kee) [1], is an alcoholic beverage made through a parallel fermentation process using grain, water, koji (Aspergillus oryzae) and yeast.
Contents
Process
Traditional method (in progress)
Milling Rice is milled to remove fats, vitamins and proteins which can cause flavors that are undesirable in traditional sake. Since these are concentrated near the surface, and starches toward the center, removing the outer portion is necessary to minimize these precursors.
Rice milled for sake is referred to by percentage, where the number indicates the remaining amount of grain. Sake quality categories are generally determined by rice milling percentage with 80-70% milling being table sake and 50% milling being premium-grade sake.
Steaming Rice is steamed, not boiled, for both koji propagation and fermentation. The rice is first washed to remove excess bran, then soaked to desired weight. Afterwards rice is steamed for the amount of time to get the surface hard and the center soft.
Koji Propagation Aspergillus oryzae spp. is propagated on steamed rice. The process is done at 28C - 36C and 70-90% humidity. Higher temperatures will yield more amylase enzymes, whereas lower temperatures will yield more protease enzymes. This process usually takes ~48 hours.
Water Miyazumi - heavenly water is often written about as the gold standard in all English texts. It contains [insert ion chart]
Starter (Moto) Ko-on Toka Shubo [2] (高温 糖化) - High Temperature Starter
Day 1
-Heat water to 60C
-Add koji
-Add steamed rice
-Maintain temp @ 58C
-Mix
-5-8 hours saccharification
-lower temp to 40C
-add lactic acid to 5pH
-cool to 25C
-add yeast
Day 2-6 Propagation
Main Ferment
See also:
Koji
Using Koji in Beer Fermentation
See also:
- MTF post by Jeffrey Airman (KOJI BROS). Using koji and rice to ferment dextrins in a coolshipped/mixed fermentation ale with wildflower honey and Japanese seaweed salt.
- MTF post by Justin Amaral. Making Peruvian purple corn Chicha using Koji to do the starch conversion, along with some kveik cultures, wild Saccharomyes, Lactobacillus, Pediococcus, and Pichia.
Makgeolli
- MTF post by Denise Rheault on brewing Makgeolli.
- MTF post by Denise Rheault on the temperature and humidity for incubating Nuruk.
Alternate Molds
Rhizopus oryzae - produces isoamylase, protease, urease, ribonuclease, pectic lyase and plygalacturaonase [3]
Rhizopus oligosporus - can produce an antibiotic against gram-positive bacteria [4]
See Also
Additional Articles on MTF Wiki
External Resources
- (Book) "Koji Alchemy: Rediscovering the Magic of Mold-Based Fermentation" by Jeremy Umansky and Rich Shih.
References
- ↑ The American Heritage Dictionary of the English Language. Boston: Houghton Mifflin Harcourt. 2011. p. 1546. ISBN 978-0-547-04101-8.
- ↑ http://www.nada-ken.com/main/en/index_k/185.html
- ↑ Petrič, Š.; Hakki, T.; Bernhardt, R.; Žigon, D.; Črešnar, B. (2010-11-01). "Discovery of a steroid 11α-hydroxylase from Rhizopus oryzae and its biotechnological application". Journal of Biotechnology. 150 (3): 428–437. doi:10.1016/j.jbiotec.2010.09.928. ISSN 0168-1656. PMID 20850485.
- ↑ Kobayasi, S.Y., Naoto O., and Takuya K. 1992. Purification and Characterization of an Antibiotic Substance Produced from Rhizopus oligosporus IFO 8631. Biosci. Biotech. Biochem 56(1):94-98.