Difference between revisions of "Blending"
(added Sour beer Blending blog article by Matt Miller) |
(added first pass of Biere de Coupage) |
||
Line 14: | Line 14: | ||
Blending by weight allows more flexibility in trial blend volumes and with a good scale it allows finer sensitivity in the amount of each beer added to trial blends. In addition, with the appropriate scale final blending may also be carried out with good precision by weight rather than estimating volumes. Small density differences between beers included in the blend can be ignored because the density range between samples is so small (an FG difference of 1.010 from 1.000 introduces a 1% error). See [https://www.facebook.com/groups/MilkTheFunk/1076426165718930/ Dave Janssen's blending spreadsheet] for a tool that will convert blended weights into volumes if you prefer to do the final blending by volume. | Blending by weight allows more flexibility in trial blend volumes and with a good scale it allows finer sensitivity in the amount of each beer added to trial blends. In addition, with the appropriate scale final blending may also be carried out with good precision by weight rather than estimating volumes. Small density differences between beers included in the blend can be ignored because the density range between samples is so small (an FG difference of 1.010 from 1.000 introduces a 1% error). See [https://www.facebook.com/groups/MilkTheFunk/1076426165718930/ Dave Janssen's blending spreadsheet] for a tool that will convert blended weights into volumes if you prefer to do the final blending by volume. | ||
− | ==Articles On Blending== | + | ==Bière de Coupage== |
+ | While historical uses of the term ''bière de coupage'' (biere de coupage) potentially referred to any blended beer (and even beers containing blends of sugar syrups, tartaric acid, or vinegar), in the mid to late 19th century the term tended to refer to blends of an older, usually sour beer, and a fresh beer to achieve a balance in flavors. The term has been applied to the various blending methods of lambic, specifically lambic and [http://horscategoriebrewing.blogspot.ca/2015/11/biere-de-mars-lambic-version-and-lambic.html ''Bière de Mars'' (Biere de Mars], [[Flanders_Red_Ale|Flanders red]] and [[Oud_Bruin|brown]] ales, and [http://www.browneandbitter.com/2014/07/brew-day-nineteenth-century-keeping.html 18th/19th century porters] <ref>[http://www.browneandbitter.com/2016/02/biere-de-coupage-some-background-and.html Bière de Coupage: Some Background and History, by Amos Browne]</ref>. Modern use of the term bière de coupage generally refer specifically to the blending of an older sour beer with a younger, hoppy saison. Examples include [http://jesterkingbrewery.com/beers/#beers_185 Jester King's "Das Wunderkind!"] and [http://jesterkingbrewery.com/introducing-salt-lick-pecan-wood-smoked-saison Salt Lick Pecan Wood Smoked Saison], and [http://www.ratebeer.com/beer/paradox-beer-shoga-kosho-biere-de-coupage-farmhouse-ale/263795/ Paradox Beer Company's "Shoga Kosho Biere de Coupage Farmhouse Ale"]. | ||
+ | |||
+ | * [http://www.browneandbitter.com/2016/02/biere-de-coupage-some-background-and.html See ''Bière de Coupage: Some Background and History'', by Amos Browne for further reading on the history and description of Bière de Coupage.] | ||
+ | |||
+ | ===Online Blog Articles=== | ||
+ | * [http://www.browneandbitter.com/search/label/Coupage Browne and Bitter, by Amos Browne.] | ||
+ | * [http://thefarmhouseobsession.blogspot.com/search/label/Biere%20de%20Couopage The Farmhouse Obsession, by Andrew Addkison] | ||
+ | |||
+ | ==Online Articles On Blending== | ||
* [http://brouwerij-chugach.com/?p=482 Practical Blending] by Brian Hall. | * [http://brouwerij-chugach.com/?p=482 Practical Blending] by Brian Hall. | ||
* [http://www.alesoftheriverwards.com/2014/06/gueuze-blending-101-and-i-am-student.html|Gueuze Blending 101] by Ed Coffey. | * [http://www.alesoftheriverwards.com/2014/06/gueuze-blending-101-and-i-am-student.html|Gueuze Blending 101] by Ed Coffey. |
Revision as of 00:43, 23 February 2016
Blending is the process of pulling samples of various, matured sour beers (and optionally clean beers), measuring out different proportions of each, mixing them together, and tasting the blended samples. The idea is that different sour beers can contribute different flavors, and balance different flavors. Since precise measurements are required, investing in cheap plastic beakers or a precise scale (0.1 g or better) is necessary. The taste tester should take thorough notes on all aspects of the beer as different proportions of blends are sampled.
Contents
Practical Tips
- Chill the samples. Taste them cold, and allow them to warm up to room temperature, tasting and smelling along the way.
- Taste each beer on it's own. Choose the best beers to begin with. Off flavors can sometimes be blended out (see Matt Miller's article below), but consider leaving beers with serious flaws out of the blend.
- Take note of everything you taste and smell, also noting the general temperature of the blend.
- Taste with friends who have good palates.
- A blend may not always taste the same once conditioned and carbonated.
- When blending a clean beer with sour beers, allow for additional fermentation to occur. Don't make any assumptions about a low final gravity of a clean beer - the Brett will probably find something to ferment.
- Make use of Michael Tonsmeire's Blending Priming Calculator if possible, or the extended version by Jeff Crane.
- To lower the acidity of a beer with a blending method, use a beer fermented with Saccharomyces and Brettanomyces (and without Lactic Acid Bacteria). You can also add water to cut down on acidity. A very small amount of non-sour beer will greatly reduce the acidity in a highly sour beer because the pH scale is logarithmic.
Blending by Weight
Blending by weight allows more flexibility in trial blend volumes and with a good scale it allows finer sensitivity in the amount of each beer added to trial blends. In addition, with the appropriate scale final blending may also be carried out with good precision by weight rather than estimating volumes. Small density differences between beers included in the blend can be ignored because the density range between samples is so small (an FG difference of 1.010 from 1.000 introduces a 1% error). See Dave Janssen's blending spreadsheet for a tool that will convert blended weights into volumes if you prefer to do the final blending by volume.
Bière de Coupage
While historical uses of the term bière de coupage (biere de coupage) potentially referred to any blended beer (and even beers containing blends of sugar syrups, tartaric acid, or vinegar), in the mid to late 19th century the term tended to refer to blends of an older, usually sour beer, and a fresh beer to achieve a balance in flavors. The term has been applied to the various blending methods of lambic, specifically lambic and Bière de Mars (Biere de Mars, Flanders red and brown ales, and 18th/19th century porters [1]. Modern use of the term bière de coupage generally refer specifically to the blending of an older sour beer with a younger, hoppy saison. Examples include Jester King's "Das Wunderkind!" and Salt Lick Pecan Wood Smoked Saison, and Paradox Beer Company's "Shoga Kosho Biere de Coupage Farmhouse Ale".
Online Blog Articles
Online Articles On Blending
- Practical Blending by Brian Hall.
- Blending 101 by Ed Coffey.
- Lambic Solera Update #17 Part 2 -- Three Years (Finally!) by Adam Kielich.
- Blending Out an Off Flavor by Matt Miller.
- Beer Blending Experiment by Michael Tonsmeire.
- Understanding, Brewing, and Blending a Lambic Style Kriek by Matt Miller.
- Beer Blending: Tips from the Pros by Betsy Parks for BYO Magazine, September 2011.
- Blending A Gueuze by Chris Colby.
- Sour, and Funky Mead Making Part III : Blending by David Doucette.
- Blending Red and Brown Sours by Amos Browne.
- Pale Sour Blending by Dave Janssen.
- Sour Beer Blending; Sour Beer Blog by Matt Miller.