Changes

Swelling barrels involves soaking the heads and/or staves of a barrel with water to cause them to swell up and form a tight seal. If a barrel has been stored dry, it might be necessary to swell the barrel, or at least leak test it, before filling it with beer. The Rare Barrel swells barrels in a couple of different ways. When they are not worried about preserving the character of what was prevously perviously held in the barrel, they fill the barrels with water without storage chemicals for a maximum of 48 hours before changing water if the barrel is not fully swollen <ref>[http://www.thebrewingnetwork.com/the-sour-hour-episode-16/ The Sour Hour Episode 16]</ref> (~33 minutes in).---To do--- external swelling (ref rare barrel, Tilquin head swelling, Todd Ashman Eclipse). <BR> External swelling can be done by placing a barrel on its head and cover the upward facing head with hot water for several hours. Flip the barrel on its other head and repeat. This process swells the heads which in turn pushes the staves tighter together in the hoops. <BR>Although impractical for homebrewers, commercial brewers and wine makers can use steam to swell barrels <ref>[http://www.steamericas.com/whats-new/barrel-steam-wand/ Barrel Steam Wand]</ref>.