Changes

Jump to: navigation, search

Barrel

406 bytes added, 21:31, 31 May 2017
no edit summary
in progress
===Swelling barrels===
Swelling barrels involves soaking the heads and/or staves of a barrel with water to cause them to swell up and form a tight seal. If a barrel has been stored dry, it might be necessary to swell the barrel, or at least leak test it, before filling it with beer. The Rare Barrel swells barrels in a couple of different ways. When they are not worried about preserving the character of what was perviously held in the barrel, they fill the barrels with water without storage chemicals for a maximum of 48 hours before changing water if the barrel is not fully swollen <ref>[http://www.thebrewingnetwork.com/the-sour-hour-episode-16/ The Sour Hour Episode 16]</ref> (~33 minutes in).---To do--- external swelling (ref rare barrel, Tilquin head swelling, Todd Ashman Eclipse). <BR> External swelling can be done by placing a barrel on its head and cover the upward facing head with hot water for several hours. Flip the barrel on its other head and repeat. This process swells the heads which in turn pushes the staves tighter together in the hoops. <BR>Although impractical for homebrewers, commercial brewers and wine makers can use steam to swell barrels <ref>[http://www.steamericas.com/whats-new/barrel-steam-wand/ Barrel Steam Wand]</ref>. Steamed barrels should be allowed to cool before bunging; cooling with a bung installed can lead to imploding barrels <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1704652009563006/?comment_id=1704659969562210&comment_tracking=%7B%22tn%22%3A%22R0%22%7D Conversation about steaming barrels and bunging on MTF. 05/31/2017.]</ref>. Steaming can also be a technique for cleaning used barrels.
* See also [https://barrelbuilders.com/wp-content/uploads/2015/02/Barrel-Maintenance-Repair-Manual.pdf Barrel Builders Barrel Maintenance Repair Manual, Section 2.3] (using SO2 for soaking more than 2 days).
MTF barrel cleaning threads:
* [https://www.facebook.com/groups/MilkTheFunk/permalink/1488853811142828/ Advice on cleaning out an old wine barrel with dried mold in it.]
* [https://www.facebook.com/groups/MilkTheFunk/permalink/1638906016137606/ James Howat of Black Project Spontaneous Ales describes his process of rinsing and steaming a new 'Stella' foeder that is 11hL (~9.4bbl / 290gal).] Steamed barrels should be allowed to cool before bunging; cooling with a bung installed can lead to imploding barrels <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1704652009563006/?comment_id=1704659969562210&comment_tracking=%7B%22tn%22%3A%22R0%22%7D Conversation about steaming barrels and bunging on MTF. 05/31/2017.]</ref>.
===Storage===

Navigation menu