Changes

The '''Essentric Eccentric Beekeeper Bulldog''' is a homemade bulldog for racking beer out of barrels using CO2 pressure. See [[Barrel#Racking_Canes|this page]] for other barrel racking canes. [[File:EBK Bulldog Overview.jpg|300px|thumb|right|Overview of the Essentric Beekeeper Bulldog]]

==Parts List==[[File:EBK Bulldog CloseupParts.jpg|none|thumb|400pxright|The bore-through compression fitting allows the racking wand to pass completely through the fitting making the depth adjustable to prevent sediment transfer.600px]] * [[Filehttps:EBK Bulldog Pressure Release//www.jpg|none|thumb|400px|Adjustable emergency pressure releasebrewershardware.]][[File:EBK Bulldog Triclovercom/3-8-Compression-X-1-2-MNPT-Bored-Through-Fitting.jpg|none|thumb|400px|Triclover attachment to rubber bung adapter.]html 3/8" Compression X 1/2" MNPT Bored Through Fitting, CF3812][[File:EBK Bulldog Triclover Bung.jpg|none|thumb|400px|The triclover rubber bung adapter lets me use the same Bulldog racking wand for Sanke fermenter kegs with barrels.]]* [[Filehttps:EBK Bulldog Underside//www.jpg|none|thumb|400px|An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wandbrewershardware. The standard stainless steel compression ringscom/sleeves in the boreSilicone-O-Ring-for-through compression fitting have been replaced with silicone o3-rings which seal with minimal tightening on the nut and never attach to the tubing permanently8-OR38. These replacement ohtml Silicone O-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal.]Ring for 3/8", OR38]

* [http://www.amazon.com/gp/product/B007GDY3CU?psc=1&redirect=Parts Listtrue&ref_=oh_aui_detailpage_o08_s00 Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Male NPT] * '''2x''' [http://www.amazon.com/gp/product/B003GSL35O?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 Stainless Steel Pipe Fitting, Reducing Bushing, 1/2" NPT Male X 1/4" Female] (one for the PRV and one for the corny post adapter) * [https://www.brewhardware.com/product_p/cross12.htm Stainless Steel Pipe Fitting, 4-Way Cross, 1/2 NPT Female] * [http://www.williamsbrewing.com/MALE-NPT-CORNY-POST-ADAPTER-P3404.aspx Male NPT Corny Post Adapter, P14] * [http://www.williamsbrewing.com/CORNELIUS-TYPE-GAS-SIDE-PLUG-P3332.aspx Cornelius-Type Gas Side Plug, P53] - This no longer includes the needed Universal Poppets (To doour item L92)or Ball Lock O Rings (item D12). You will need one L92 and one D12 in addition to this post to complete your male in gas fitting. * [http://www.williamsbrewing.com/UNIVERSAL-POPPET-VALVE-P2924.aspx Universal Poppet Valve, L92] * [http://www.williamsbrewing.com/BLACK-KEG-FITTING-O-RING-BALL-LOCK-P59.aspx Black Keg Fitting O Ring - Ball Lock, D12] * '''2x''' [https://www.brewershardware.com/2-Tri-Clover-X-1-2-Male-NPT.html 2" Tri Clover Compatible X 1/2" Male NPT, TC20M12] (one for the cross and one for the bung; [https://www.brewershardware.com/2-Tri-Clover-X-1-2-Hose-Barb-TC20B12.html a barbed adapter] might be easier to slide the bung onto). * [https://www.brewershardware.com/2-Tri-Clover-Clamp.html 2" Tri Clover Compatible Clamp] * [https://www.brewershardware.com/Silicone-O-Ring-for-F1.html Silicone O-Ring for 2" Tri Clover Clamp]

===External Resources=== * [https://www.facebook.com/groups/MilkTheFunk/permalink/1200966313264914/ Q&A on MTF with Eccentric Beekeeper about this build.]* [http://www.brewhardware.com/product_p/sankefermenterkit_pressure.htm Similar rig for sanke kegs from Brewers Hardware.]