Difference between revisions of "Eccentric Beekeeper Bulldog"
(Created page with "The '''Essentric Beekeeper Bulldog''' is a homemade bulldog for racking beer out of barrels using CO2 pressure. See this page for other barrel rackin...") |
|||
| Line 1: | Line 1: | ||
The '''Essentric Beekeeper Bulldog''' is a homemade bulldog for racking beer out of barrels using CO2 pressure. See [[Barrel#Racking_Canes|this page]] for other barrel racking canes. | The '''Essentric Beekeeper Bulldog''' is a homemade bulldog for racking beer out of barrels using CO2 pressure. See [[Barrel#Racking_Canes|this page]] for other barrel racking canes. | ||
| − | |||
==Overview== | ==Overview== | ||
| − | + | [[File:EBK Bulldog Overview.jpg|none|200px|thumb|400px|Overview of the Essentric Beekeeper Bulldog]] | |
| − | |||
| − | |||
[[File:EBK Bulldog Closeup.jpg|none|thumb|400px|The bore-through compression fitting allows the racking wand to pass completely through the fitting making the depth adjustable to prevent sediment transfer.]] | [[File:EBK Bulldog Closeup.jpg|none|thumb|400px|The bore-through compression fitting allows the racking wand to pass completely through the fitting making the depth adjustable to prevent sediment transfer.]] | ||
[[File:EBK Bulldog Pressure Release.jpg|none|thumb|400px|Adjustable emergency pressure release.]] | [[File:EBK Bulldog Pressure Release.jpg|none|thumb|400px|Adjustable emergency pressure release.]] | ||
| Line 12: | Line 9: | ||
[[File:EBK Bulldog Underside.jpg|none|thumb|400px|An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wand. The standard stainless steel compression rings/sleeves in the bore-through compression fitting have been replaced with silicone o-rings which seal with minimal tightening on the nut and never attach to the tubing permanently. These replacement o-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal.]] | [[File:EBK Bulldog Underside.jpg|none|thumb|400px|An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wand. The standard stainless steel compression rings/sleeves in the bore-through compression fitting have been replaced with silicone o-rings which seal with minimal tightening on the nut and never attach to the tubing permanently. These replacement o-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal.]] | ||
| + | ==Parts List== | ||
| + | [[File:EBK Bulldog Parts.jpg|right|600px]] | ||
| + | |||
| + | * [https://www.brewershardware.com/3-8-Compression-X-1-2-MNPT-Bored-Through-Fitting.html 3/8" Compression X 1/2" MNPT Bored Through Fitting, CF3812] | ||
| + | |||
| + | * [https://www.brewershardware.com/Silicone-O-Ring-for-3-8-OR38.html Silicone O-Ring for 3/8", OR38] | ||
| + | |||
| + | * [http://www.homebrewing.org/Stainless-Steel-Racking-Cane-30_p_904.html Stainless Steel Racking Cane, 3/8" OD x 30" Long] | ||
| + | |||
| + | * [http://www.amazon.com/gp/product/B007GDY3CU?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 Control Devices CR Series Brass Pressure Relief Valve, 0-100 psi Adjustable Pressure Range, 1/4" Male NPT] | ||
| + | |||
| + | * [http://www.amazon.com/gp/product/B003GSL35O?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 Stainless Steel Pipe Fitting, Reducing Bushing, 1/2" NPT Male X 1/4" Female] | ||
| + | |||
| + | * [https://www.brewhardware.com/product_p/cross12.htm Stainless Steel Pipe Fitting, 4-Way Cross, 1/2 NPT Female] | ||
| + | |||
| + | * [http://www.williamsbrewing.com/MALE-NPT-CORNY-POST-ADAPTER-P3404.aspx Male NPT Corny Post Adapter, P14] | ||
| − | + | * [http://www.williamsbrewing.com/CORNELIUS-TYPE-GAS-SIDE-PLUG-P3332.aspx Cornelius-Type Gas Side Plug, P53] - This no longer includes the needed Universal Poppets (our item L92) or Ball Lock O Rings (item D12). You will need one L92 and one D12 in addition to this post to complete your male in gas fitting. | |
| − | ( | + | |
| + | * [http://www.williamsbrewing.com/UNIVERSAL-POPPET-VALVE-P2924.aspx Universal Poppet Valve, L92] | ||
| + | |||
| + | * [http://www.williamsbrewing.com/BLACK-KEG-FITTING-O-RING-BALL-LOCK-P59.aspx Black Keg Fitting O Ring - Ball Lock, D12] | ||
| + | |||
| + | * [https://www.brewershardware.com/2-Tri-Clover-X-1-2-Male-NPT.html 2" Tri Clover Compatible X 1/2" Male NPT, TC20M12] | ||
| − | + | <br /><br /><br /><br /><br /> | |
==See Also== | ==See Also== | ||
Revision as of 14:24, 24 December 2015
The Essentric Beekeeper Bulldog is a homemade bulldog for racking beer out of barrels using CO2 pressure. See this page for other barrel racking canes.
Contents
Overview
An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wand. The standard stainless steel compression rings/sleeves in the bore-through compression fitting have been replaced with silicone o-rings which seal with minimal tightening on the nut and never attach to the tubing permanently. These replacement o-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal.
Parts List
- Cornelius-Type Gas Side Plug, P53 - This no longer includes the needed Universal Poppets (our item L92) or Ball Lock O Rings (item D12). You will need one L92 and one D12 in addition to this post to complete your male in gas fitting.