13,591
edits
Changes
Created page with "The '''Essentric Beekeeper Bulldog''' is a homemade bulldog for racking beer out of barrels using CO2 pressure. See this page for other barrel rackin..."
The '''Essentric Beekeeper Bulldog''' is a homemade bulldog for racking beer out of barrels using CO2 pressure. See [[Barrel#Racking_Canes|this page]] for other barrel racking canes.
[[File:EBK Bulldog Overview.jpg|300px|thumb|right|Overview of the Essentric Beekeeper Bulldog]]
==Overview==
(To do)
[[File:EBK Bulldog Closeup.jpg|none|thumb|400px|The bore-through compression fitting allows the racking wand to pass completely through the fitting making the depth adjustable to prevent sediment transfer.]]
[[File:EBK Bulldog Pressure Release.jpg|none|thumb|400px|Adjustable emergency pressure release.]]
[[File:EBK Bulldog Triclover.jpg|none|thumb|400px|Triclover attachment to rubber bung adapter.]]
[[File:EBK Bulldog Triclover Bung.jpg|none|thumb|400px|The triclover rubber bung adapter lets me use the same Bulldog racking wand for Sanke fermenter kegs with barrels.]]
[[File:EBK Bulldog Underside.jpg|none|thumb|400px|An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wand. The standard stainless steel compression rings/sleeves in the bore-through compression fitting have been replaced with silicone o-rings which seal with minimal tightening on the nut and never attach to the tubing permanently. These replacement o-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal.]]
==Parts List==
(To do)
[[File:EBK Bulldog Parts.jpg]]
==See Also==
===Additional Articles on MTF Wiki===
* [[Barrel]]
===External Resources===
==References==
<references/>
[[Category:Equipment]]
[[File:EBK Bulldog Overview.jpg|300px|thumb|right|Overview of the Essentric Beekeeper Bulldog]]
==Overview==
(To do)
[[File:EBK Bulldog Closeup.jpg|none|thumb|400px|The bore-through compression fitting allows the racking wand to pass completely through the fitting making the depth adjustable to prevent sediment transfer.]]
[[File:EBK Bulldog Pressure Release.jpg|none|thumb|400px|Adjustable emergency pressure release.]]
[[File:EBK Bulldog Triclover.jpg|none|thumb|400px|Triclover attachment to rubber bung adapter.]]
[[File:EBK Bulldog Triclover Bung.jpg|none|thumb|400px|The triclover rubber bung adapter lets me use the same Bulldog racking wand for Sanke fermenter kegs with barrels.]]
[[File:EBK Bulldog Underside.jpg|none|thumb|400px|An inside view shows the simple "works" within the triclover fitting, liquid inside the wand and gas outside the wand. The standard stainless steel compression rings/sleeves in the bore-through compression fitting have been replaced with silicone o-rings which seal with minimal tightening on the nut and never attach to the tubing permanently. These replacement o-rings allow the racking wand to slide up and down through the compression fitting while maintaining the seal.]]
==Parts List==
(To do)
[[File:EBK Bulldog Parts.jpg]]
==See Also==
===Additional Articles on MTF Wiki===
* [[Barrel]]
===External Resources===
==References==
<references/>
[[Category:Equipment]]