13,593
edits
Changes
updated Pitching Rates and Starters with Matt Miller information referenced
In addition to the starter information given in the [[Lactobacillus#Manufacturer_Tips|Manufacturer Tips]] above, this section includes general advice for ''Lactobacillus'' starters for homebrewers and brewers. For growing ''Lactobacillus'' in a lab environment, or from an initial grouping of cells from a plate/slant or smaller cell count, MRS media is the most efficient growth media. However, for full pitches of ''Lactobacillus'' in beer/wort, brewers probably don't want to add that much MRS media to their beer since MRS media has a distinct odor and smell that would not be desirable in beer <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1152135114814701/?comment_id=1152674674760745&offset=0&total_comments=9&comment_tracking=%7B%22tn%22%3A%22R0%22%7DConversation with Lance Shaner and Nick Impellitteri on Lacto starters on MTF. 09/22/2015.]</ref>. Therefore, growing ''Lacto'' in a wort-based starter media is recommended for building full pitches of ''Lacto''. See [[Lactobacillus#External_Resources|External Resources]] for additional starter guides.
Pitching ~0.5-1 liter per ~20 liters of wort (~0.75-1 gallon per barrel) of ''Lactobacillus'' starter is the general guideline. The exact advisable pitching rates of commercial cultures may differ from manufacture to manufacturer. <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1077639885597558/ MTF thread started by Brad Primozic. 5/29/2015.]</ref>. Counting cells and pitching an exact cell count is the exact number best approach. However, counting cells of cells ''Lacto'' under a microscope can be difficult to achieve due to the small size of bacteria cells, so starter volumes are generally used instead when talking about pitching rates for ''Lactobacillus'' <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1068323126529234/?comment_id=1068337639861116&offset=0&total_comments=47&comment_tracking=%7B%22tn%22%3A%22R9%22%7D Conversation on MTF with Bryan Heit. 5/6/2015.]</ref>. Matt Miller of Sour Beer Blog and Richard Preiss of Escarpment Yeast Labs advise that if ideal growth (1-2 billion cells/mL) can be achieved (for example by using [[Lactobacillus#Samuel_Aeschlimann.27s_Starter_Procedures|Samuel Aeschlimann's starter procedure]]), then pitching as little as 100-125 mL of fresh ''Lacto'' starter for 5 gallons of beer can achieve desirable acidity within 24 hours <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1180630378631841/?comment_id=1180733761954836&reply_comment_id=1180740128620866&comment_tracking=%7B%22tn%22%3A%22R9%22%7D Conversation with Richard Preiss on MTF regarding Lacto starters. 11/19/2015.]</ref><ref name="sbb2.0"></ref>. Average growth in a starter results in around 500 million cells/mL, resulting in a 400 mL starter for 5 gallons, and low growth results in around 100 million cells/mL, resulting in a 2 liter starter for 5 gallons, according to Matt Miller (see [http://sourbeerblog.com/lactobacillus-2-0-advanced-techniques-for-fast-souring-beer/ Matt Miller's article] for more details) <ref name="sbb2.0"></ref> . Without a microscope, it is difficult to tell how much growth has occurred. Also, achieving a pH of 4 as fast as possible is advisable for preventing off-flavors from other microbes <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1180630378631841/?comment_id=1181674265194119&reply_comment_id=1181715048523374&comment_tracking=%7B%22tn%22%3A%22R7%22%7D Conversation with Bryan Heit on MTF regarding speed of acid production with Lacto. 11/20/2015.]</ref>. Achieving a desirable low pH as fast as possible might also help with head retention. Therefore, unless using [[Lactobacillus#Samuel_Aeschlimann.27s_Starter_Procedures|Samuel Aeschlimann's starter procedure]], pitching 0.5-1 liters of starter for 5 gallons of wort is advisable in general. Even when using [[Lactobacillus#Samuel_Aeschlimann.27s_Starter_Procedures|Samuel Aeschlimann's starter procedure]], over-pitching ''Lactobacillus'' is not a concern (pitching a massive starter wort could produce undesirable flavors), so the same pitch rate should still be considered unless. Other factors that might affect the effectiveness of a volume based starter is the species/strain of the ''Lacto'' being used, and how much yeast contamination has occurred. Some species/strains may require a larger volume of starter, as well as if yeast has contaminated the starter or wort.
Starter mediums that brewers have used include unhopped DME wort starters and apple juice starters. These tend to be adequate for many brewers. However, [https://eurekabrewing.wordpress.com/2015/05/18/evaluate-starter-media-to-propagate-lactobacillus-sp/ Samuel Aeschlimann from Eureka Brewing Blog] showed that using DME with a little bit of apple juice, chalk, and yeast nutrients provides close to optimal cell densities that match MRS media cell densities.