Changes

Jump to: navigation, search

Lactobacillus

2,729 bytes added, 20:47, 22 September 2017
m
no edit summary
We recommend brewing with GB110 in one of three ways. I) “Hot Start”: Pitch GB110 to wort at 98 F with little or no hops for 48-72 hrs. Wort may be soured before kettle boil or after. If soured before kettle boil, boil with hop additions as usual. If soured after kettle boil cool wort and pitch yeast. II) “Co-Pitch”: Pitch GB110 into a primary with yeast of your choice at 68-72 F. Wort that is less than 1050 and 7 IBU will typically be very sour in 2-3 weeks. III) “Secondary”: Pitch GB110 after primary fermentation for an aged sour. Souring by this method typically requires several months. Adding simple sugars or fruit etc. will enhance souring in the secondary <ref>[http://www.gigayeast.com/fast-souring-lacto GigaYeast Webpage. Retrieved 7/22/2015.]</ref>. Sometimes referred to as GigaYeast's "Fast Acting Lacto". This strain is hop sensitive <ref name="steve_smith">[https://www.facebook.com/groups/MilkTheFunk/permalink/1068326413195572/?comment_id=1069411906420356&offset=0&total_comments=12&comment_tracking=%7B%22tn%22%3A%22R%22%7D Conversation with Steve Smith of GigaYeast on MTF. 05/08/2015.]</ref>.
|-
| Lallemand || WildBrew Sour Pitch || L. plantarum <ref>[https://www.facebook.com/Lallemandyeasts/photos/a.941604692537326.1073741829.939455986085530/1656901501007638/?type=3&comment_id=1657229347641520&reply_comment_id=1657231934307928&comment_tracking=%7B%22tn%22%3A%22R5%22%7D Post on the Lallemand Facebook page. 09/22/2017. Retrieved 09/22/2017.]</ref> || Facultatively homofermentative || || See [https://www.facebook.com/groups/MilkTheFunk/permalink/1790290834332456/ this information from Scott Lucas on MTF]. This culture comes in a dry (desiccated) format. Although the [http://www.lallemandbrewing.com/product-details/wildbrew-sour-pitch manufacturer's website] claims this strain is tolerant of 8 IBU, we recommend that brewers treat this strain like any other strain of ''L. plantarum'' and do not expose it to any hops until the desired acidity has been produced (for example, see [[Wort Souring]]). Recommended temperature: 86-104°F.
|-
| [[Omega Yeast Labs]] || OYL-605 || L. brevis, <span style="text-decoration: line-through;">delbrueckii</span>, and plantarum blend || Hetero/Hetero <ref name="mtf_wiki_shaner"></ref> || 1 liter starter for a 5 gallon batch of beer at room temperature for 24-48 hours. No stir plate unless kept anaerobic. || Quick souring. Pitch into 65°F-95°F <ref name="adi_oyl605"></ref>. Holding temperature is not required. No longer contains delbruekii <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1065268213501392/?comment_id=1065669443461269&offset=0&total_comments=18&comment_tracking=%7B%22tn%22%3A%22R%22%7D Conversation with Raymond Wagner of Oso Brewing Co on Milk The Funk. 4/30/2015.]</ref>. Don't use any hops if possible. 2 IBU is a good target if hops must be used <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1092523807442499/?comment_id=1092571350771078&offset=0&total_comments=6&comment_tracking=%7B%22tn%22%3A%22R1%22%7D Conversation with Lance Shaner on MTF in regards to IBU tolerance of OYL-605. 6/15/2015.]</ref>. Contains ~150 billion cells per homebrew pitch <ref name="sbb2.0">[http://sourbeerblog.com/lactobacillus-2-0-advanced-techniques-for-fast-souring-beer/ Lactobacillus 2.0 – Advanced Techniques for Fast Souring Beer. Sour Beer Blog. Matt Miller. 11/18/2015. Retrieved 11/19/2015.]</ref>.
|-
| [[The Yeast Bay]] || Lactobacillus Blend || L. plantarum, L. brevis, and an unidentified ''Lactobacillus'' species || Heterofermentative || || The Lactobacillus Blend includes three strains: Lactobacillus plantarum, Lactobacillus brevis and a strain of Lactobacillus isolated from a very unique brewer of American sour beers the returned a sequencing result of "uncultured Lactobacillus". Sure to please anyone with a knack for creating sour beers, it can quickly produce acidity across a wide range of temperatures. This blend can be used on its own for kettle souring prior to pitching yeast to create acidity quickly, or co-pitched with yeast to create sourness over time. It will produce a pronounced and rounded acidity that is the foundation of any complex sour beer. We recommend holding the IBU on the low end (< 2-3) if you'd like to use this blend to create acidity in a shorter time frame. Higher IBUs may result in very slow or no souring (testing is still ongoing to determine IBU at which lactic acid production is inhibited). Temperature: 70-90°F. Cell count: 50-80 million cells/mL (1.75-2.8 billion cells for 35 mL homebrew vials) <ref name="WL_cellcounts"></ref><ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1280135442014667/?comment_id=1280341068660771&reply_comment_id=1280498695311675&comment_tracking=%7B%22tn%22%3A%22R1%22%7D Conversation with Nick Impellitteri on MTF regarding TYB Lactobacillus Blend cell counts. 04/08/2016.]</ref>. Recommended temperature range for fastest acid production for kettle souring is 85-90°F, although if kept in the 70's it should produce good acidification in 48-72 hours. A major drop off of in acid production is seen above 90°F <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1616265398401668/?comment_id=1617001948328013&comment_tracking=%7B%22tn%22%3A%22R%22%7D Impellitteri, Nick. Milk The Funk Facebook group. 03/17/2017.]</ref>.
|-
| [[The Yeast Bay]] || TYB282 || L. brevis || Heterofermentative || || TYB282 is a single strain of Lactobacillus brevis isolated out of an unintentionally soured golden ale produced by a Mexican craft brewery.
This strain produces a nice, clean lactic acidity (down to ~pH 3.16-3.18) in unhopped wort within 36 hours at a temperature of ~72-77 F. The higher the temperature (up to 90 F is what we've tested), the faster the acid production. This is a great strain for kettle souring, as it grows rather quickly and produces acidity fast with no detectable off flavors. We are about to begin some trials in hopped wort to test out the acidification in the presence of hop compounds, though we presume there is some level of adaptation to hop compounds given the environment in the beer from which we cultured the strain. Temperature: 70-90 ºF.
|-
| [[White Labs]] || WLP677 || L. delbrueckii (potentially misidentified) || Heterofermentative <ref name="mtf_wiki_shaner">[http://www.milkthefunk.com/wiki/100%25_Lactobacillus_Fermentation Milk The Funk Wiki. 100% Lactobacillus Fermentation Test by Lance Shaner.]</ref><ref name="tmf_cultures">[http://www.themadfermentationist.com/p/commercial-cultures.html ''Commercial Brettanomyces, Lactobacillus, and Pediococcus Descriptions''. The Mad Fermentationist Blog. Michael Tonsmeire. Retrieved 3/4/2015.]</ref> || no stir plate, room temp ||Incubate at > 90°F and < 117°F for 5-7 days for greater lactic acid production. Cell count: 50-80 million cells/mL (1.75-2.8 billion cells in a 35 mL homebrew vial) <ref name="WL_cellcounts">Private correspondence with White Labs Customer Service and Dan Pixley. 10/29/2015.</ref>. Not a good strain for kettle souring, but can produce a "soft" acidity over a longer period of time <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1212455192116026/?comment_id=1212475888780623&reply_comment_id=1212476575447221&comment_tracking=%7B%22tn%22%3A%22R3%22%7D Conversation with Andrew Addkison on MTF. 01/12/2016.]</ref>. White Labs claims that it is tolerant to up to 20 IBU, although growth starts to become inhibited at 15 IBU <ref name="WL_datasheet" /><ref>[http://www.themadfermentationist.com/p/commercial-cultures.html "Commercial Brettanomyces, Lactobacillus, and Pediococcus Descriptions; Commercial Yeast Laboratories." The Mad Fermentationist blog. Michael Tonsmeire. Retrieved 12/12/2016.]</ref>. Generally heat tolerant, but sours faster between 100-110°F <ref name="WL_datasheet">[www.whitelabs.com/sites/default/files/R%26D%20Wild%20Yeast%20and%20Bacteria%20Experiments_2.pdf "R&D Wild Yeast and Bacteria Experiments". White Labs data sheet. Retrieved 05/16/2017.]</ref>
Although more experiments and probably needed, agitation is believed to be an important factor for both yeast and bacteria in general. Gentle stirring on a stir plate or orbital shaker, or frequent gentle manual agitation leads to faster growth and a higher number of organisms. Agitation keeps the microbes in solution. It also maximizes the microbes' access to nutrients and disperses waste evenly. In a non-agitated starter, the microbes are limited to the diffusion rate of nutrients, leading to a slower and more stressful growth <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1168024059892473/?comment_id=1174865305875015&reply_comment_id=1176092372418975&total_comments=1&comment_tracking=%7B%22tn%22%3A%22R9%22%7D Conversation with Bryan of Sui Generis Blog about starters and agitation. 11/09/2015.]</ref>. If agitation is not possible for whatever reason, a successful starter can be made without agitation. Sam Aeschlimann reported good success with ''Lactobacillus'' starters that are not agitated <ref name="Sam_starter2"></ref>.
Although ''Lactobacillus'' are tolerant of oxygen and oxygen usually does not negatively affect their growth (except in the case of ''L. plantarum'', which has been shown to produce small amounts of acetic acid when exposed to oxygen and glucose is not present <ref name="Quatravaux_plantarum">[http://onlinelibrary.wiley.com/doi/10.1111/j.1365-2672.2006.02955.x/full Examination of Lactobacillus plantarum lactate metabolism side effects in relation to the modulation of aeration parameters. S. Quatravaux, F. Remize, E. Bryckaert, D. Colavizza, J. Guzzo. 2006]</ref><ref name="microbewiki_plantarum"></ref>), it is also generally not needed (an exception to this may be ''L. brevis'', which has been shown to increase growth rates in the presence of oxygen <ref name="brevis_aeration"></ref>). Therefore, it is generally best practice to prevent aerating the starter with an airlock for ''Lactobacillus'' starters. If exposure to air occurs, and the starter does not smell like it has been contaminated by the exposure, then the starter can still be used.
* For information on mixed culture starters, see [[Mixed_Cultures#Starters_and_Other_Manufacturer_Tips|Mixed Culture Starters]].
Although 100% apple juice or 100% DME starters will "work" for ''Lactobacillus'' starters, they do not provide optimal growth conditions. [https://eurekabrewing.wordpress.com/2015/05/18/evaluate-starter-media-to-propagate-lactobacillus-sp/ Samuel Aeschlimann from Eureka Brewing Blog] ran a set of experiments that found a DME based recipe for starter wort that produces a very high cell density similar to that of MRS media, which provides optimal growth rates for ''Lactobacillus''.
The recipe for this starter wort is: '''1.040 SG (10°P) Dried Malt Extract wort with 10% apple juice + 20 grams of chalk (CaCO3) per liter + yeast nutrients'''. Regarding the use of chalk, it is the preferred buffer because it does not react with CO2 (unlike baking soda), so it won't be consumed by exposure to air due to CO2 production by the Lacto. It also has a pKa (maximum buffering capacity) of around 4.6, which is ideal for ''Lactobacillus'' growth. The fact that it easily precipitates out also makes it ideal to use as a buffer <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1180630378631841/?comment_id=1181674265194119&reply_comment_id=1181743348520544&comment_tracking=%7B%22tn%22%3A%22R%22%7D Conversation with Bryan of Sui Generis Blog regarding the use of chalk as a buffer in Lacto starters. 11/20/2015.]</ref>. Jeff Mello from [[Bootleg Biology]] and , Nick Impellitteri from [[The Yeast Bay]], and Bryan from [https://suigenerisbrewing.blogspot.com/ Sui Generis blog] suggest that using the smaller amount of 1.5-2 grams of CaCO3 per liter is preferable because that amount is easier to precipitate out of the starter and avoid pitching into the beer (the growth differences from using less chalk has not been tested though) <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1369904163037794/?comment_id=1370329352995275&reply_comment_id=1372184639476413&comment_tracking=%7B%22tn%22%3A%22R%22%7D Conversation with Jeff Mello on MTF regarding using less chalk in LAB starters. 08/10/2016.]</ref><ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1619935741367967/?comment_id=1619986154696259&reply_comment_id=1619991214695753&comment_tracking=%7B%22tn%22%3A%22R9%22%7D Impellitteri, Nick. Milk The Funk Facebook group. 03/19/2017.]</ref><ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1457469187614624/?comment_id=1457541770940699&reply_comment_id=1457620514266158&comment_tracking=%7B%22tn%22%3A%22R%22%7D Bryan from Sui Generis. MTF Thread on using 1.5g/L of chalk for Lactobacillus starters. 11/02/2016.]</ref>. To create a 1 liter starter for 20 liters of wort, follow these directions:
# Add 100 grams of DME to around 900 mL of water and heat pasteurize/boil as you would normally do for a starter. This should make 1.040 SG (10°P) starter wort.
====Cell Growth====
<blockquote>"I typically grow it by itself anaerobically in [http://www.neogen.com/Acumedia/pdf/ProdInfo/7406_PI.pdf MRS media]. Seems to work very well and results in good growth. I've personally had the best success with MRS media and in an anaerobic environment, though I know some ''Lactobacillus'' strains grow aerobically just fine. The problem with growing lactic acid bacteria is the acid they produce will eventually inhibit their own growth. MRS contains a buffer to help combat the drop in pH as a result of LAB metabolism, which keeps the pH around 6-6.5 (I think) for optimal growth. I usually grow them at 35 C, but sometimes incubator space is at a premium (like right now) and I just [use a stir plate with an airlock]" <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1031115430250004/?comment_id=1031228363572044&offset=0&total_comments=24 Conversation with Nick Impellitteri on Milk The Funk Facebook group. 3/5/2015.]</ref>. - Nick Impellitteri from [[The Yeast Bay]] on general Lactobacillus cell growth</blockquote>
Maximum cell densities of ''Pediococcus'' and ''Lactobacillus'' are around 1-9 billion cells/mL, depending on the available nutrients (amino acids and FAN) in the growth media <ref name="Peyer">[http://www.asbcnet.org/publications/journal/vol/2015/Pages/ASBCJ-2015-0811-01.aspx Growth Study, Metabolite Development, and Organoleptic Profile of a Malt-Based Substrate Fermented by Lactic Acid Bacteria. ​Lorenzo C. Peyer, Emanuele Zannini, Fritz Jacob, and Elke K. Arendt. 2015.]</ref><ref>[https://www.reddit.com/r/Homebrewing/comments/3qp7b7/advanced_brewers_round_table_neva_parker_white/cwh7iqq Neva Parker, Reddit thread. 10/29/2015.]</ref>. Cell growth rates concur with a drop in pH and a rise in [[Titratable_Acidity|titratable acidity]]. Brewer's wort has shown to be a nutritionally adequate growth medium for ''Lactobacillus''. Both growth and the the lowering of pH begin to stabilize around 12-48 hours (assuming the ''Lactobacillus'' does not have any yeast to compete with). Titratable acidity will also rise drastically during growth, but will also continue to rise after growth has completed. The maximum growth that a particular species or strain is capable of might be explained by its pH tolerance, and thus its ability to produce more acid. For example, ''L. plantarum'' has been shown to grow in a very low pH environment (3.37-3.0 pH, depending on strain) due to their ability to better control large pH gradients between the cytoplasma and the external environment. This has been shown in the [[Lactobacillus#Commercially_available_Lactobacillus_strains_and_their_pH_change_over_time|above data provided by Matt Humbard]], as well as this reference <ref name="Peyer"></ref>. Thomas Hübbe's masters thesis showed that a strain of ''L. brevis'' had a spike of growth after 50 hours, and then a small dip in cell count after 96 hours, at which time the cell count remained consistent for at least 528 hours <ref name="Hubbe"></ref>.
Cell growth can also be influenced by the presence of other microorganisms, such as ''Saccharomyces'' and ''Brettanomyces''. One study by Hübbe showed that ''L. brevis'' and ''L. parabrevis'' grew to the normal high cell counts when grown individually and without competition. When co-fermented with ''Brettanomyces'', the cell count of ''L. brevis'' was halved, and the growth rate of ''L. parabrevis'' was greatly diminished to about 15-20% (the pitching rate of ''Brettanomyces'' was also tested, and seemed to not have an effect on the ''Lactobacillus'' growth). When co-fermented with both ''S. cerevisiae'' and ''Brettanomyces'', the ''Lactobacillus'' growth was greatly diminished to about 2-13% of what the normal cell growth was without competition. This appears to correspond with anecdotal reports from brewers that some ''Lactobacillus'' species/strains do not compete well with yeast, especially ''S. cerevisiae'' <ref name="Hubbe"></ref>.
 
Most ''Lactobacillus'' species have a thermal death rate of ~145°F (63°C). Freezing without glycerol will kill most cells, but it is possible for a very small number of cold-resistant mutant cells to survive <ref>[http://fermentationnation.net/2015/11/episode-26-quality-assurance-w-jessica-davis-of-the-bruery/ Fermentation nation Podcast interview with Jessica Davis, QA for The Bruery.]</ref> (~1:19:00 in).
====Effects of Oxygen====
All [https://en.wikipedia.org/wiki/Prokaryote prokaryotes], which includes all bacteria, are categorized based on the levels of oxygen in their environment in which they can grow and how they utilize oxygen, if at all <ref name="Todar_nutgro4"></ref>. ''Lactobacillus'' species are usually considered to be "facultative anaerobes" (or "facultative aerobes") <ref name="todar_lactics4"></ref>, however they are a special case. Facultative anaerobes usually make energy from oxygen if it is present via the [https://en.wikipedia.org/wiki/Oxidative_phosphorylation oxidative phosphorylation pathway], but otherwise engage in anaerobic fermentation <ref>[http://www.ncbi.nlm.nih.gov/books/NBK21208/ Biochemistry. 5th edition. Berg JM, Tymoczko JL, Stryer L. 2002. Chapter 18.]</ref><ref>[http://inst.bact.wisc.edu/inst/index.php?module=book&type=user&func=displayarticle&aid=111 Virtual Microbiology Textbook. Department of Bacteriology, University of Wisconsin-Madison. Retrieved 12/02/2015.]</ref>. ''Lactobacillus'' species can utilize oxygen, but not through the oxidative phosphorylation pathway. They use an alternative pathway instead. This pathway uses flavine-containing oxidases and peroxidases to carry out the oxidation of NADH2 using O2 <ref name="bergey">Bergey's Manual of Systematic Bacteriology, 2nd edition. pg 471</ref><ref>Correspondence with Bryan of Sui Generis Blog from Dan Pixley. 12/01/2015.</ref>. Lactobacilli, therefore, are unique in that they blur the line between facultative anaerobes and another class of prokaryotes known as "aerotolerant anaerobes". Aerotolerant anaerobes do not use oxygen to generate energy, but can grow in the presence of oxygen.
The important take away here is that oxygen doesn't significantly affect ''Lactobacillus'' species. They do not care if oxygen is present in order to grow and produce energy for themselves and lactic acid for brewers. They also do not produce significant amounts of [[Butyric_Acid|butyric acid]] or [[Isovaleric_Acid|isovaleric acid]] in the presence of oxygen <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1182597671768445/?qa_ref=qd&comment_id=1182773928417486&reply_comment_id=1183242405037305&comment_tracking=%7B%22tn%22%3A%22R7%22%7D Conversation with Bryan of Sui Generis Blog on MTF regarding butyric acid production by Lactobacillus. 11/23/2015.]</ref>.
There are, however, a few exceptions to this in the scientific literature. For example, ''L. plantarum'', which is a facultatively heterofermentative species, is homolactic without the presence of oxygen and produces only lactic acid. After food sources have been exhausted and in the presence of oxygen, however, ''L. plantarum'' switches to heterolactic fermentation, and further converts lactic acid into acetic acid. In a lab setting the conversion of lactic acid to acetic acid only happened when glucose was no longer available (this may not be the case in wort where other limiting factors such as low pH can prevent ''L. plantarum'' from continuing their metabolic processes before all glucose is consumed, which is the case in kettle souring), and only during the stationary phase (after growth stopped). During the conversion of lactic acid to acetic acid, ''L. plantarum'' also produces hydrogen peroxide (H<sup>2</sup>0<sup>2</sup>), which is toxic to microorganisms and is thought to be a protection mechanism for ''L. plantarum'' <ref>[http://www.ncbi.nlm.nih.gov/pubmed/6480562 Physiological role of pyruvate oxidase in the aerobic metabolism of Lactobacillus plantarum. Sedewitz B, Schleifer KH, Götz F.1984.]</ref><ref name="Quatravaux_plantarum"></ref><ref name="microbewiki_plantarum">[https://microbewiki.kenyon.edu/index.php/Lactobacillus_plantarum_and_its_biological_implications Lactobacillus plantarum and its biological implications. Microbe Wiki. Retrieved 6/7/2015.]</ref><ref name="shaner_plantarum"></ref>. This same process has also been observed in one strain of ''L. brevis'' and under similar conditions of depleted nutrients and oxygen <ref>[http://aem.asm.org/content/early/2017/08/21/AEM.01659-17.abstract The oxygen-inducible conversion of lactate to acetate in heterofermentative Lactobacillus brevis ATCC367. Tingting Guo, Li Zhang, Yongping Xin, ZhenShang Xu, Huiying He, and Jian Kong. 2017.]</ref>. Omega Yeast Labs reports that no noticeable acetic acid is produced if the oxygen is not purged with their OYL-605 ''Lactobacillus'' blend which contains ''L. plantarum'', and brewers should not aerate wort during sour but purging O2 is not required <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1222363364458542/?comment_id=1222371257791086&reply_comment_id=1225212894173589&comment_tracking=%7B%22tn%22%3A%22R%22%7D MTF conversation with Adi Hastings from Omega Yeast Labs on the effects of oxygen presence in OYL-605. 02/02/2016.]</ref>. ''L. brevis'' has been shown to increase growth rates in the presence of oxygen <ref name="brevis_aeration"></ref>. Thomas Hübbe's master thesis showed that under lab growth media "VLB-S7-S", "NBB®-A", and MYPG + cyclohexmide, both strains of ''Lactobacillus'' tested (''L. brevis'' and ''L. parabrevis'') did not show growth in an aerobic chamber, but did grow in an anaerobic chamber <ref name="Hubbe">[https://www.facebook.com/groups/MilkTheFunk/1407620505932826/ Effect of mixed cultures on microbiological development in Berliner Weisse (master thesis). Thomas Hübbe. 2016.]</ref>.
====Hop Tolerance====
Peyer et al. (2017) examined the effects of the sugar content of brewer's wort on a strain of ''Lactobacillus amylovorous''. They found that the higher gravity of the wort increased the growth of the ''Lactobacillus'', and therefore also the lactic acid production. This increase was linear until the extract reached 16%, at which time the growth increase began to slow down. The higher growth and more lactic acid production in higher gravity wort was probably due to increased nutrients as well as a higher buffer capacity. This growth increase plateaued in wort that had 18-20% sugar content, which was likely due to osmotic stress on the cells <ref name="Peyer_2017">[http://www.asbcnet.org/publications/journal/vol/2017/Pages/ASBCJ-2017-3861-01.aspx Sour Brewing: Impact of Lactobacillus amylovorus FST2.11 on Technological and Quality Attributes of Acid Beers. Lorenzo C. Peyer, Martin Zarnkow, Fritz Jacob, David P. Schutter, Elke K. Arendt. 2017.]</ref>.
 
====Tolerance of Extreme Temperature====
Most ''Lactobacillus'' species have a thermal death rate of ~145°F (63°C). Freezing without glycerol will kill most cells, but it is possible for a very small number of cold-resistant mutant cells to survive <ref>[http://fermentationnation.net/2015/11/episode-26-quality-assurance-w-jessica-davis-of-the-bruery/ Fermentation nation Podcast interview with Jessica Davis, QA for The Bruery.]</ref> (~1:19:00 in).
====Storage====

Navigation menu