Changes

:A [http://seanterrill.com/2015/06/25/build-a-better-spunding-valve/ spunding valve] can also be used to help guard against over-carbonation when keg conditioning. The CO2 gauges on spunding valves can be inaccurate, however, so finding the correct PSI setting requires the following technique. The goal is to set it to be around 30 PSI for room temperature conditioning. First, pressurize the keg to 30 PSI using a reliable CO2 regulator, then remove the gas line while the keg is still pressurized. Fully tighten the spunding valve's pressure release valve ('''PRV''') so that no gas is released, and attach it to the keg's gas line. Slowly turn the PRV on the spunding valve so that the gas is released. Continue to release the gas until the faintest "hiss" of gas can be heard, and then slightly tighten the PRV. The PRV might be set to something like 40 or 50 PSI, but the reliable CO2 regulator can be used to verify that the spunding valve's PRV is set to the desired level. The actual PSI within the keg might oscillate around 27-32 PSI, so this technique might need some trial and error. Shoot for under-carbonation versus over-carbonation. If the beer is slightly under-carbonated, force carbonation can make up the difference. Slight over-carbonation should be avoided because it could make the beer very difficult to serve <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1373107886050755/?comment_id=1374126712615539&reply_comment_id=1374144919280385&comment_tracking=%7B%22tn%22%3A%22R3%22%7D Keg conditioning thread on MTF with Bryan from Sui Generis and Devin Henry. 08/12/2016.]</ref>.

:Another method for setting the spunding valve's PRV to the correct PSI setting would be to use a keg of beer that is already perfectly carbonated. Allow the keg to warm to conditioning temperatures. Attach the spunding valve with the PRV completely closed. Slowly release the PRV until you hear a slight hiss. This should reach the PSI setting that the spunding valve needs to be set at to reach around the same carbonation for other kegs. Kegs should be filled up to the same headspace as the keg that was used to set the PRV setting <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1462140453814164/?comment_id=1462348370460039&reply_comment_id=1462389737122569&comment_tracking=%7B%22tn%22%3A%22R9%22%7D Keg conditioning thread on MTF with Taylor John Caron. 11/07/2016.]</ref>.

* '''Green glass v Brown glass''' - Some bottle types, especially champagne style bottles, may be more available in green glass compared to brown glass. Green glass does a worse job shielding the beer from UV spectrum light, which can interact with hop compounds to produce 'skunky' or lightstruck flavors and aromas. Many classic Belgian mixed fermentation beers are found in green glass, and some producers in North America seek out green glass over brown glass for their beers <ref>[http://jesterkingbrewery.com/jester-king-in-green-bottles Jester King blog post about green bottles]</ref><ref>[http://www.thebrewingnetwork.com/the-sour-hour-episode-15/ Jester King on the Sour Hour, pt 2]</ref> (~11 minutes in) (also, Bob Sylvester).