Difference between revisions of "Turbid Mash"

From Milk The Funk Wiki
Jump to: navigation, search
(Alternative methods to yield starchy wort)
 
(5 intermediate revisions by the same user not shown)
Line 7: Line 7:
 
==Typical Mash Procedure==
 
==Typical Mash Procedure==
  
Turbid mashing procedures are outlined well in [http://www.funkfactorygeuzeria.com/2011/12/cantillon-turbid-mash.html Levi's writeup of Cantillon's procedure] and Wild Brews by Jeff Sparrow (see the [[books]] page). Brewers conducting traditional turbid mashes usually have at least a 4 vessel system: a mash/lauter tun, a kettle to hold turbid wort, a hot liquor tank (or hot water on demand) and a boil kettle to receive the mash runnings. Many different specific turbid mashes may used by varying rest temperatures and the numbers and timings of turbid pulls. This was the case for historic turbid mashing (see, for example, Johnson, 1918<ref name='Johnson 1918'/>). An example of a modern turbid mash based on records and observations of Cantillon's process is as follows:
+
Turbid mashing procedures are outlined well in [http://funkfactorybrewing.blogspot.com/2011/12/cantillon-turbid-mash.html Levi's writeup of Cantillon's procedure] and Wild Brews by Jeff Sparrow (see the [[books]] page). Brewers conducting traditional turbid mashes usually have at least a 4 vessel system: a mash/lauter tun, a kettle to hold turbid wort, a hot liquor tank (or hot water on demand) and a boil kettle to receive the mash runnings. Many different specific turbid mashes may used by varying rest temperatures and the numbers and timings of turbid pulls. This was the case for historic turbid mashing (see, for example, Johnson, 1918<ref name='Johnson 1918'/>). An example of a modern turbid mash based on records and observations of Cantillon's process is as follows:
  
 
* The grist, which traditionally in lambic is malted barley and ~30-40% unmalted wheat (see [https://www.facebook.com/groups/MilkTheFunk/permalink/1874873632540842/ this MTF thread for tips for homebrewers and commercial brewers on milling raw wheat]), is doughed to reach a temperature of 45°C (113°F). At this point the mash is very thick.
 
* The grist, which traditionally in lambic is malted barley and ~30-40% unmalted wheat (see [https://www.facebook.com/groups/MilkTheFunk/permalink/1874873632540842/ this MTF thread for tips for homebrewers and commercial brewers on milling raw wheat]), is doughed to reach a temperature of 45°C (113°F). At this point the mash is very thick.
Line 19: Line 19:
  
 
Originally, this process was done to avoid high taxes because at the time breweries were taxed on their mash tun size.  The resulting wort is high in unconverted starch.  See [http://www.horscategoriebrewing.com/2017/07/lambic-attenuation-and-carbohydrate.html "Lambic attenuation and carbohydrate composition " by Dave Janssen] for more details.  There is also evidence that this process was desired for other styles of beer such as low strength beers even after the tax laws were changed in Belgium (see [http://www.horscategoriebrewing.com/2016/02/thoughts-on-johnson-1918-belgian.html "Thoughts on Johnson 1918 - a Belgian mashing system for low-strength beers" by Dave Janssen]).
 
Originally, this process was done to avoid high taxes because at the time breweries were taxed on their mash tun size.  The resulting wort is high in unconverted starch.  See [http://www.horscategoriebrewing.com/2017/07/lambic-attenuation-and-carbohydrate.html "Lambic attenuation and carbohydrate composition " by Dave Janssen] for more details.  There is also evidence that this process was desired for other styles of beer such as low strength beers even after the tax laws were changed in Belgium (see [http://www.horscategoriebrewing.com/2016/02/thoughts-on-johnson-1918-belgian.html "Thoughts on Johnson 1918 - a Belgian mashing system for low-strength beers" by Dave Janssen]).
 +
 +
See also:
 +
* [https://www.youtube.com/watch?v=i6-8z4beSsw "Brew a Spontaneous Sour Beer" video on  Hops & Gnarly YouTube channel using an Anvil Foundry (electric BIAB).]
  
 
==Alternative methods to yield starchy wort==
 
==Alternative methods to yield starchy wort==
One of the main goals of turbid mashing for mixed culture beer is to yield a starchy wort in order to carry carbohydrates which are unfermentable to ''Saccharomyces'' but fermentable to ''Brettanomyces'' and lactic acid bacteria into the fermentation. There are other approaches that brewers have taken to come to this same end result of starchy wort without the labor and equipment-intensive turbid mashing process. These alternatives will likely not yield the same exact results as turbid mashing, but depending on the brewer's goals they may be sufficient and/or preferred. Some of these methods, as outlined in the [[Spontaneous Fermentation#Mashing|spontaneous fermentation]] page, include the addition of flour to the boil <ref name="Burgundian Babble Belt discussion">[http://www.babblebelt.com/newboard/thread.html?tid=1108752780&th=1243453104 Burgundian Babble Belt discussion]</ref> passing hot mash runnings through flaked grains <ref name="Flat Tail on the Brewing Network">[http://thebrewingnetwork.com/shows/1027/ Flat Tail on the Brewing Network, ~1:04 in]</ref>, adding flaked grains to the mash at the mashout step <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1238633759498169/?comment_id=1238646569496888&comment_tracking=%7B%22tn%22%3A%22R%22%7D Mark's alternative process for a starchy wort]</ref>, soaking a huskless grain such as oats in the boil, pulling mash runnings before full conversion without the prolonged processing of a turbid mash <ref name="Flat Tail on the Brewing Network" /><ref>[http://www.homebrewtalk.com/showthread.php?t=448529 Homebrewtalk Thread by Amos Browne.  April 2012.  Retrieved 02/08/2016.]</ref>, using maltodextrin in the boil, or even adding [http://traffic.libsyn.com/basicbrewing/bbr04-03-14pastasour.mp3 100% wheat pasta].  Although he mostly conducts traditional turbid mashes, James Howat of Black Project Spontaneous Ales has experimented with doing a 165-170°F (74-76.7°C) single infusion of a 60/40% pilsner/raw wheat grist for 15 minutes to simulate extracting the starch content of a turbid mash <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/2043930728968464/?comment_id=2043936328967904&reply_comment_id=2044070385621165&comment_tracking=%7B%22tn%22%3A%22R%22%7D Howat, James.  MTF discussion on doing very hot, short mashes to simulate turbid mashing.  03/31/2017.]</ref>.  De Garde Brewing does something very similar using a blend of 58% to 42% ratio of pale malt to unmalted wheat and a 165°F single infusion mash for a short period of time <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/2731832153511648/?comment_id=2731866683508195&comment_tracking=%7B%22tn%22%3A%22R%22%7D Alex Rosenberg and Crook Ti.  Milk The Funk Facebook group thread on alternatives to turbid mashing.  06/17/2019.]</ref>.
+
One of the main goals of turbid mashing for mixed culture beer is to yield a starchy wort in order to carry carbohydrates which are unfermentable to ''Saccharomyces'' but fermentable to ''Brettanomyces'' and lactic acid bacteria into the fermentation. There are other approaches that brewers have taken to come to this same end result of starchy wort without the labor and equipment-intensive turbid mashing process. These alternatives will likely not yield the same exact results as turbid mashing, but depending on the brewer's goals they may be sufficient and/or preferred. Some of these methods, as outlined in the [[Spontaneous Fermentation#Mashing|spontaneous fermentation]] page, include the addition of flour to the boil <ref name="Burgundian Babble Belt discussion">[http://www.babblebelt.com/newboard/thread.html?tid=1108752780&th=1243453104 Burgundian Babble Belt discussion]</ref> passing hot mash runnings through flaked grains <ref name="Flat Tail on the Brewing Network">[http://thebrewingnetwork.com/shows/1027/ Flat Tail on the Brewing Network, ~1:04 in]</ref>, adding flaked grains to the mash at the mashout step <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/1238633759498169/?comment_id=1238646569496888&comment_tracking=%7B%22tn%22%3A%22R%22%7D Mark's alternative process for a starchy wort]</ref>, soaking a huskless grain such as oats in the boil, pulling mash runnings before full conversion without the prolonged processing of a turbid mash <ref name="Flat Tail on the Brewing Network" /><ref>[http://www.homebrewtalk.com/showthread.php?t=448529 Homebrewtalk Thread by Amos Browne.  April 2012.  Retrieved 02/08/2016.]</ref>, using maltodextrin in the boil, or even adding [http://traffic.libsyn.com/basicbrewing/bbr04-03-14pastasour.mp3 100% wheat pasta].  Although he mostly conducts traditional turbid mashes, James Howat of Black Project Spontaneous Ales has experimented with doing a 165-170°F (74-76.7°C) single infusion of a 60/40% pilsner/raw wheat grist for 15 minutes to simulate extracting the starch content of a turbid mash <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/2043930728968464/?comment_id=2043936328967904&reply_comment_id=2044070385621165&comment_tracking=%7B%22tn%22%3A%22R%22%7D Howat, James.  MTF discussion on doing very hot, short mashes to simulate turbid mashing.  03/31/2017.]</ref>.  De Garde Brewing does something very similar using a blend of 58% to 42% ratio of pale malt to unmalted wheat and a 165°F single infusion mash for a short period of time <ref>[https://www.facebook.com/groups/MilkTheFunk/permalink/2731832153511648/?comment_id=2731866683508195&comment_tracking=%7B%22tn%22%3A%22R%22%7D Alex Rosenberg and Crook Ti.  Milk The Funk Facebook group thread on alternatives to turbid mashing.  06/17/2019.]</ref>. Ryan Fields, formerly of Beachwood Blendery, reported doing single infusion mashes at 168°F with no rest (dough in and immediately drain out) <ref>[https://www.thebrewingnetwork.com/the-session-federation-brewing-company-2/ Ryan Fields of Wild Fields Brewhouse. The Session podcast interview.  01/17/2022. (~1:19:45 in).]</ref>. Matt Van Wyk from Alesong mashes 25% of the grist at a protein rest temperature, and then they heat it to denature the enzymes in this portion of the wort to create a turbid portion. The rest of the mash is mashed at 158°F. They also add oats to the grist <ref>[https://beerandbrewing.com/podcast-episode-253-matt-van-wyk-and-brian-coombs-of-alesong-brewing-and-blending/ Craft Beer and Blending Podcast Episode 253: Matt Van Wyk and Brian Coombs of Alesong Stay Focused on the Barrel. 08/12/2022.]</ref>(72 mins in).  
  
 
See also:
 
See also:
Line 42: Line 45:
  
 
===External Resources===
 
===External Resources===
* [http://www.funkfactorygeuzeria.com/2011/12/cantillon-turbid-mash.html Levi's write-up of Cantillon's procedure]
+
* [http://funkfactorybrewing.blogspot.com/2011/12/cantillon-turbid-mash.html Levi's write-up of Cantillon's procedure]
 
* [https://www.brewunited.com/index.php?blogid=117 Traditional Lambic Using a Turbid Mash - BrewUnited Blog Post]
 
* [https://www.brewunited.com/index.php?blogid=117 Traditional Lambic Using a Turbid Mash - BrewUnited Blog Post]
 +
* [https://www.themadfermentationist.com/2009/08/lambic-3-turbid-mash.html Michael Tonsmeire's "The Mad Fermentationist" blog - Turbid Mash Instructions]
 
* [http://www.lambic.info/Brewing_Lambic Lambic.info page on brewing lambic]
 
* [http://www.lambic.info/Brewing_Lambic Lambic.info page on brewing lambic]
 
* [http://www.brewerspublications.com/books/wild-brews-beer-beyond-the-influence-of-brewers-yeast/ Wild Brews by Jeff Sparrow]
 
* [http://www.brewerspublications.com/books/wild-brews-beer-beyond-the-influence-of-brewers-yeast/ Wild Brews by Jeff Sparrow]

Latest revision as of 23:41, 19 September 2022

Turbid Mashing is a labor-intensive process involves taking the mash through multiple temperature rests through infusions of hot water and the removal of 'turbid' starchy wort that is not fully converted. This process was used historically for a range of beers, both aged mixed-culture acidic beers[1] and young beers[2]. In modern brewing, this technique is known because of its use in the production of traditional lambic. The main goals of turbid mashing are to maximize extraction from a grist with a high percentage of unmalted grains and to produce a dextrinous wort, which can then feed wild yeasts and bacteria during the long fermentation that beers such as lambic undergo. Turbid mashing also pulls more tannin material from the grain due to especially hot sparge temperatures and prolonged sparging.

For the full process of spontaneous fermentation as is done in traditional lambic brewing and Méthode Traditionnelle, see the Spontaneous Fermentation page. This page refers only to the mashing process that is often incorporated in spontaneous fermentation (and also some historical saisons).

Typical Mash Procedure

Turbid mashing procedures are outlined well in Levi's writeup of Cantillon's procedure and Wild Brews by Jeff Sparrow (see the books page). Brewers conducting traditional turbid mashes usually have at least a 4 vessel system: a mash/lauter tun, a kettle to hold turbid wort, a hot liquor tank (or hot water on demand) and a boil kettle to receive the mash runnings. Many different specific turbid mashes may used by varying rest temperatures and the numbers and timings of turbid pulls. This was the case for historic turbid mashing (see, for example, Johnson, 1918[2]). An example of a modern turbid mash based on records and observations of Cantillon's process is as follows:

  • The grist, which traditionally in lambic is malted barley and ~30-40% unmalted wheat (see this MTF thread for tips for homebrewers and commercial brewers on milling raw wheat), is doughed to reach a temperature of 45°C (113°F). At this point the mash is very thick.
  • By infusion of hot water the temperature is raised to 56°C (133°F). After a short rest the first turbid portion is pulled (liquid wort only is pulled; the grain is left in the mash tun). The volume pulled is about 4-5% of the total target brew volume. This turbid portion is then heated to ~ 90°C (~190°F). The main mash rests a bit longer at 56°C.
  • By infusion the temperature is raised to 66°C (151°F). This is the main saccharification step and the rest here is longer. The second turbid portion (liquid wort only is pulled; the grain is left in the mash tun) is pulled from the mash during this step (~24% of the total brew volume).
  • By infusion the temperature is raised to 72°C (162°F). After a short rest the mash is lautered into the boil kettle.
  • After the first runnings are collected, the turbid portion is added back to the mash. This heats the mash to a mash-out temperature. After a short settling time this is also lautered to the boil kettle (see this MTF thread for thoughts from Dave Janssen on possible enzymatic activity on the turbid wort during re-adding it to the mash tun).
  • The mash is sparged with especially hot water (~88°C, ~190°F). This pulls more tannins that a traditional sparging temperature would. The amount of sparge water used is typically significantly more volume than modern brewing methods, and results in a large volume of low gravity wort that is then boiled for 3-5 hours to reach the desired post boil gravity (see Lambic for the rest of the lambic brewing process).

Turbid mashing is possible with more simple systems with some modifications to the process. For example, if a second kettle is not available to hold turbid wort while keeping the main bottle kettle clear to collect runnings, the turbid wort can be collected into the main single boil kettle. It is then necessary to add this turbid wort back before collecting the first runnings. In this case, the turbid wort rather than an infusion of near-boiling water is used to raise the mash to the final temperature (step 4 above), therefore clearing the boil kettle to receive the wort. A system such as this is employed by 3 Fonteinen as they have only one boil kettle. Jester King follows a similar process, where the turbid wort is added back at the end of the mash before collecting wort for the boil, for their Spon series [3] (discussion starts ~9 minutes in). An extra fermentation tank can serve as a hot liquor tank as needed[4]. Turbid mashing is also fully possible with brew in a bag (BIAB - see this MTF thread for tips on turbid mashing in BIAB).

Originally, this process was done to avoid high taxes because at the time breweries were taxed on their mash tun size. The resulting wort is high in unconverted starch. See "Lambic attenuation and carbohydrate composition " by Dave Janssen for more details. There is also evidence that this process was desired for other styles of beer such as low strength beers even after the tax laws were changed in Belgium (see "Thoughts on Johnson 1918 - a Belgian mashing system for low-strength beers" by Dave Janssen).

See also:

Alternative methods to yield starchy wort

One of the main goals of turbid mashing for mixed culture beer is to yield a starchy wort in order to carry carbohydrates which are unfermentable to Saccharomyces but fermentable to Brettanomyces and lactic acid bacteria into the fermentation. There are other approaches that brewers have taken to come to this same end result of starchy wort without the labor and equipment-intensive turbid mashing process. These alternatives will likely not yield the same exact results as turbid mashing, but depending on the brewer's goals they may be sufficient and/or preferred. Some of these methods, as outlined in the spontaneous fermentation page, include the addition of flour to the boil [5] passing hot mash runnings through flaked grains [6], adding flaked grains to the mash at the mashout step [7], soaking a huskless grain such as oats in the boil, pulling mash runnings before full conversion without the prolonged processing of a turbid mash [6][8], using maltodextrin in the boil, or even adding 100% wheat pasta. Although he mostly conducts traditional turbid mashes, James Howat of Black Project Spontaneous Ales has experimented with doing a 165-170°F (74-76.7°C) single infusion of a 60/40% pilsner/raw wheat grist for 15 minutes to simulate extracting the starch content of a turbid mash [9]. De Garde Brewing does something very similar using a blend of 58% to 42% ratio of pale malt to unmalted wheat and a 165°F single infusion mash for a short period of time [10]. Ryan Fields, formerly of Beachwood Blendery, reported doing single infusion mashes at 168°F with no rest (dough in and immediately drain out) [11]. Matt Van Wyk from Alesong mashes 25% of the grist at a protein rest temperature, and then they heat it to denature the enzymes in this portion of the wort to create a turbid portion. The rest of the mash is mashed at 158°F. They also add oats to the grist [12](72 mins in).

See also:

Carbohydrate Composition and Utilization Through Fermentation

Little work has been done to identify the types and amounts of carbohydrates in turbid mashes. One reference for an unknown lambic brewery showed that simple sugars (under 3 carbon chains) were 62%, 3-6 carbon chain sugars were 18%, 185+ carbon chain starches were 8%, 6-30 were 5%, 30-61 were 6%, and 61-185 were 1%. This study showed that the longest chain sugars were the third highest fraction in this instance of turbid wort. During the extended fermentation, the longest chain sugars were broken down into medium sized sugars during the by lactic acid bacteria and Brettanomyces. By the end of fermentation (nearing 1°P), these long chain sugars were mostly used up; however, there was surprisingly a higher amount of smaller and medium-sized sugars than the longer chain sugars. See this Hors Categorie blog article for more information.

Roos et al. (2018) reported that glucose (8.0 g/l), fructose (2.5 g/l), sucrose (4.0 g/l), maltose (60.0 g/l), maltotriose (12.0 g/l), and higher maltooligosaccharides (<4.0 g/l) were the most abundant sugars in turbid wort produced at an unnamed lambic brewery. The wort, which was pre-acidified to a pH of 4.5 with lactic acid, also had some organic acids: lactic acid (1.2 g/l), citric acid (250 mg/l), malic acid (200 mg/l), and gluconic acid (70 mg/l) [13].

See also

MTF Wiki Pages

External Resources

References