Difference between revisions of "Wild Yeast Isolation"

From Milk The Funk Wiki
Jump to: navigation, search
Line 22: Line 22:
  
 
==Growing Without Isolation==
 
==Growing Without Isolation==
(To do)
+
While using agar plates to isolate yeast colonies is the most effective way to culture wild yeast, it is not the only way.  Wild yeast should be caught using starter wort as outlined in [http://bootlegbiology.com/diy/capturing-yeast/ Bootleg Biology's ''Method 1'' or ''Method 2''].  The starter wort's pH should be lowered to below 4.5 to avoid bacteria as much as possible.  Molds may still grow in the yeast starter even with the lower pH.  Signs of a small krausen within a day or two is a good sign that viable wild yeast has been collected.  After another day or two, the yeast will start dropping to the bottom of the vessel <ref>[http://www.homebrewtalk.com/collecting-wild-yeast.html Collecting Wild Yeast.  Manoaction.  Homebrewtalk.  Oct 30, 2012.]</ref>. 
 +
 
 +
Once the starter has fermented out, decant the beer and pitch the collected yeast into a larger volume of starter wort, again lowering the pH to below 4.5 of the wort.
  
 
==See Also==
 
==See Also==

Revision as of 11:54, 22 May 2015

Wild yeast isolation, sometimes known as yeast wrangling, refers to the process of catching wild yeast, and isolating it with agar plates as a pure culture. This article will also contain information for growing up a captured mixed culture in wort rather than isolating pure cultures.

Special thanks goes out to Bryan Heit from Sui Generis blog and Jeff Mello from Bootleg Biology for providing the information in this article.

Isolating Pure Cultures

Preparation

  • Bryan Heit's video guide to setting up a clean workspace, building and using an alcohol lamp, and aseptic techniques.
  • Bootleg Biology's guide on creating agar plates using wort, agar powder, and yeast nutrient.
  • Bryan Heit's guide to more types of agar plates, and video tutorial.

Catching

  • Bootleg Biology defines three methods of catching a wild yeast.
  • Bryan Heit's video tutorial for catching wild yeast from fruit or from the air.

Isolating

  • Bootleg Biology's guide to streaking agar plates to isolate the captured yeast cultures.
  • Bryan Heit's video guide on how to streak agar plates.
  • Bryan Heit's video guide on streaking plates and further isolating yeast.

Identifying

  • Bryan Heit's video guide on how to visually identify usable yeasts versus potential pathogens and molds.

Growing Without Isolation

While using agar plates to isolate yeast colonies is the most effective way to culture wild yeast, it is not the only way. Wild yeast should be caught using starter wort as outlined in Bootleg Biology's Method 1 or Method 2. The starter wort's pH should be lowered to below 4.5 to avoid bacteria as much as possible. Molds may still grow in the yeast starter even with the lower pH. Signs of a small krausen within a day or two is a good sign that viable wild yeast has been collected. After another day or two, the yeast will start dropping to the bottom of the vessel [1].

Once the starter has fermented out, decant the beer and pitch the collected yeast into a larger volume of starter wort, again lowering the pH to below 4.5 of the wort.

See Also

External Resources

References