Changes

Jump to: navigation, search

Mead

296 bytes added, 06:37, 10 October 2017
Alternative Fermentation Techniques
Being that raw honey can have a host of microbes within it, the only way to do a true spontaneous mead fermented with ambient microbes is to use a pasteurized honey with water that has been pasteurized or boiled. Outside of this technique, it would be considered a wild Mead. You could also pasteurize your own honey by holding the must at 170 F but you may also risk loosing some of the honey's attributes and flavors.
The concept of catching the ambient microbes is very much the same as beer however. For large batches you can use coolships, in which case you can refer to the [[Coolship|Coolship wiki page]] for proper dimensions. The dimensions matter less for the cooling rate as you won't be bringing the must to a boil but will work for volume to surface ratio for inoculation surface. As mentioned on the coolship page if your doing smaller batches it's best to just use your kettle as a coolship vessel. If your looking to imitate cooling rates of Lambic you could use external heating sources in your coolship vessel to keep temperature from dropping to quickly in colder temps.
==See Also==
318
edits

Navigation menu